The following table gives the compatibility list for the MicroRead/SecuRead hardware, the firmware version, and the Open NFC Software Stack.
| Hardware version | Firmware version | Open NFC version |
|---|---|---|
| 3.4 | >=7.13 | 4.3.x (except beta releases) |
| 7.x up to 7.12 | 4.2.x | |
| 3.3 | 6.x | 3.5 |
With every release of Open NFC, the official approved version of Loader and Firmware (the one validated with this release) is provided in the NFC HAL for MicroRead edition, under config folder.
The Loader filename is like: “Microread_ROM_3-40_LoaderPatcher_7.3.A Loader 7-OR-0B_30_FULL.XML”. This corresponds to version 7.3.A of the patcher utility, used to flash version 7-OR-0B of the Loader. We often refer to the Loader version not in hexadecimal but in decimal, so that would be the Loader 7.11a.
The Firmware filename is more explicit.
The following table is only valid for MicroRead and SecuRead hardware version 3.4.
| Loader version | Firmware version | Comment |
|---|---|---|
| up to 7.07a | up to 7.10a | These are old versions, please check compatibility matrix directly with Inside Secure. |
| 7.07a to 7.10a | 7.10a to 7.14a | Any combination should be fine between these versions. It is advised to use the loader and firmware that are delivered with your version of Open NFC. |
| 7.11a | 7.15a | These versions must be used together. |